Fuel management and tank gauging systems.
Secure - Measure - Record
Fuel management
and tank gauging systems.
HOME BASIC INFORMATION FAQ PHOTOS DISTRIBUTORS
TANK GAUGING DATA DOWNLOADING and SAMPLES UPDATES
Smart-Fill systems can be fitted with "Smart-Dip" automated tank dipping, or the Smart-Dip is available as a separate unit. This enables you to view the tank levels at any time, either on the system LC display, or via SMS from any mobile phone.
You simply send the system an SMS text message, then the tank balances will be sent back in a text message to your mobile phone.
This feature can be combined with a Smart-Fill fuel management system, or it can be installed as a stand alone tank gauging unit.
Scroll down for more information.
Right Click here, then click "Save As" to download a basic SmartDip information sheet in Word format. (31 Kb)
What
is SmartDip
?
An electronic automatic tank gauging system which can monitor up to 8 tanks,
which can send tank levels to you on demand via mobile phone SMS messaging.
How
does it work ?
A pressure sensor is installed into your tank(s), either in the water drainoff at the bottom of the tank, or through the top of the tank in a
sealed tube. The Smart-Dip electronics are connected to the sensor via a data
cable, and the electronics measure the pressure in the tank. Weight conversion
and density correction are applied and then the system refers to the tank chart
chip (an electronic dipstick in the system memory).
The tank levels are then
shown on the Smart-Dip display in a continuous cycle.
What
products can be measured ?
Almost any non Flammable product can be measured, with densities ranging from
0.500 to 60.
Consult your supplier for confirmation.
You should expect accuracy to within approximately 30mm of actual fluid level.
The slight variation is due to fluid density and atmospheric pressure changes,
and inherant changes in the electronics / wiring etc.
The system is not quite as accurate as radar systems, but the
price certainly reflects this. It also does not suffer from the effects of metal
objects such as stiffening bars etc in the tank, as ultrasonic systems are
susceptible to. Ultrasonic systems also require the tip of the sensor to be
cleaned regularly. The Smart-Dip system is a simple design for people who require a
reasonably accurate system for re-ordering and basic stock control, if you
require exact levels, the extra expense of a radar system is
required.
How do I view the tank levels ?
The levels are continuously cycling on the LC display on the Smart-Dip
enclosure. Tank levels are able to be shown in either Litres or mm, as set up by
the user.
A mobile phone modem can be
installed into the system, and you can view the tank contents by sending
the Smart-Dip an SMS
from your mobile phone, and it will send an SMS message back to you with the
tank levels.
Can
it do my fuel management and recording as well as the tank gauging ?
Yes, you can combine the SmartDip system with a SmartFill fuel management system to
perform both tasks. You then have a complete fuel management and reporting
system in the one box.
Is
installation simple ?
The system is quite simple to install. Installation of the pressure sensor into
the tank / pipe work may require fittings to be added, or in some cases existing
fittings etc are satisfactory. On double skinned tanks the sensor needs to be
installed through the top of the tank in a sealed metal tube.
The manufacturers can assist
with suggestions for installing ports etc. The system also requires power to be
connected to the Smart-Dip, and a data cable needs to run from the Smart-Dip to
each tank sensor.
What other features should I know about ?